Product Type:Low temperature pipe,Low Temperature Alloy Steel Tube,Seamless Low temperature pipe,Carbon Steel Seamless Low Temperature

Specifiction:

Product Type:Low Temperature Pipe

Size:
Outer diameter(OD): 73-630mm
Wall thickness(WT): 6-35mm
LENGTH:Single Random, Double Random, Cut Length

Application:In Refineries, Power Plants, Boilers, Heat Exchangers, Condensers etc.

Pipe Standard:ASTM A333/ASME SA333  

Heat Treatment:

Annealed: Bright Annealed,Spheroidize Annealed, Normalized, Stress Relieved, Cold Finished, Quenched And Tempered

1. ASTM A333 Chemical Composition Requirements

*For Grade 1 and 6, each reduction of 0.01% C below 0.30%, an increase of 0.05 % Mn above 1.06 % would be permitted to a max. of 1.35%.
*For Grade 6, the limit for columbium may be increased up to 0.05 % on heat analysis and 0.06 % on product analysis.
*Generally, the carbon equivalent C.E = [C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15] shall not exceed 0.43% by heat analysis.

2. ASTM A333 Mechanical Properties

*The elongation values are furnished on the basis of standard round  2 inch or 50 mm(or 4D) specimens.
*Elongation of Grade 11 is for all walls and small sizes tested in full section.

3.  Charpy V-notch Impact Tests

*A denotes minimum average notched bar impact value of each set of three specimens.
*B denotes minimum notched bar impact value of one specimen only of a set.

* Impact tests specified for temperatures lower than 70 °F [20 °C] should be made with precautions.

Specification